Cold Rolled Steel Communication Rack Cabinet / Electronic Equipment Cabinet YH9003

Sun protection Windproof Proof Communication Rack Cabinet with Flexible Size YH9003

The interior of the cabinet shall be provided with 4 or 6 mounting columns for the installation of equipment and fixed floor plates. The installation column can be moved forward and backward to adjust;
The internal dimensions of the cabinet, such as spacing and hole spacing of the installation columns, shall meet the requirements of GB/T 3047.2;
The depth of the laminate is 850mm±5mm, and the load of the reinforced laminate is ≥100kg. Each laminate requires 15 laminates.
Laminates should be easy to install and remove, and their installation height and front and rear positions can be adjusted;
The fixing method of the laminating board can be fixed according to the user's needs, using screws or elastic bolts, snap-in parts, etc.;
The effective installation depth of equipment inside the cabinet is ≥950mm;
The cabinet is designed with upper cabling. Three lower holes are provided on both sides of the top of the rack. Rubber protection is applied around the holes to prevent abrasion and avoid sharp edges damaging the cables. Power lines and signal lines go through separate outlet holes

industrial server cabinet

outdoor communications cabinet

Cold Rolled Steel Communication Rack Cabinet / Electronic Equipment Cabinet YH9003 Images